0Avoddlem

Happymodel Moblite7 V3.0 Walksnail 1S 75mm HD Whoop FPV Racing Drone with Walksnail Avatar Nano HD Digital System

4.9

★★★★★

$245.99 /$300.11

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$233.99 /$300.11

Attam Kinn Cartak Add

Credit Card

Suroxit Rupantor

Moffat Dhod

Konnem Kinnnlear Moffat Dhod

Poth Prokria

$9.9 poros adim kinnnlear Moffat Poth

Parthonn Prokria

Dhod 40 Disam Bhitor Parthonn Ghetat. Pasun Dhod Parthonn Zainat. Gift Card Pasun Kinnnlelem Parthonn Zainat.

Moffat Dhod

Roymall-ak Swagat, Tumche Dhod Store. Ami Tumche Avodd Pasun Moffat Dhod Ditat. Amche Dhod Sod ani Tumcho Dhod Ghe.

Poth Prokria

Amchem Poth 2 Disam Bhitor.Normal Poth 5-7 Disam.Poth Kal Videshanchea Vellar Bodol Zait.

1. Parthonn Prokria

Amkam roymall.com pasun Kinnnlelem Parthonn Ghetat. Moffat Dhod Parthonn Zainat. Dhod Upayog Zainaslem Parthonn Ghetat.Parthonn 3-5 Disam Bhitor Ghetat.Pasun Dhod Parthonn Zainat.Amkam Email: service@roymall.com va Whatsapp: +8619359849471

2.Rupantor

Parthonn Zalem Porthun Rupam Miletat. Poth Kharch Parthonn Zainat.Amkam Email: service@roymall.com va Whatsapp: +8619359849471

V2.0 update log:

1. Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore.

2. Changed the propeller to Gemfan 1635-3 propellers.

V3.0 Update log:

1. ELRS RX Version, Flight Controller AIO ESC board change into SuperX HD ELRS Flight Controller

2. Frsky Receiver Versions still v2 version.

3. Changed to A30 connector

Notes:

1. Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible.

2. NOT Included Lipo battery!

Specification:

Brand: Happymodel

Model: Moblite7 Walksnail V3

Item Name: 1S 75mm HD Whoop FPV Racing Drone

Frame wheelbase: 75mm
Weight: 34.5 gram without battery
Size: 98mm*98mm*48mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30

Onboard blackbox ready

	New V3.0 Version	Old Version
Flight Controller	SuperX HD ELRS Flight Controller Betaflight 4.4.2 firmware readynFirmware target: CRAZYBEEF4DXnMCU:STM32F411CEU6 (100MHz, 512K FLASH)nSensor: BMI270 or ICM42688P (SPI connection)nPower supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this dronenBuilt-in 12A(each) Blheli_S 4in1 ESC Dshot300 readnBuilt-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware updatenBluejay ESC Firmware readynBuilt-in 5V 1A BECnBuilt-in voltage detectionnNo betaflight analog osd chip	SuperbeeF4 Lite ELRS/FRSKY SPI ELRS version Firmware target: CrazybeeF4SX1280 SPI FRSKY version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection) Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/ExpressLRS receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HVnCurrent: 12A continuous peak 15A (3 seconds)nSupport ESC-Configurator and BLHELI_S Suite configuratornFactory firmware: Z-H-30 u2013 Bluejay, 0.19, 48kHznDefault protocol: DSHOT300	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV (2.8v~4.35v) Currents: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard Receiver	ELRS Receiver Version: Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHznAntenna: enameled copper wire 31mm lengthnTelemetry output Power: <12dBmnReceiver protocol: CRSFnDefault firmware version: ExpressLRS V3.0.1nThe same hardware with Happymodel EP1 receivernCould update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through Frsky Receiver: Doesn"t have V3 Version.	ELRS Receiver Version: Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module Frsky Receiver Version: SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt) Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol

Motor	Model: 1002 20000KVnConfigu-ration:9N12PnStator Diameter:10mmnStator Length:2mmnShaft Diameter:u03a61.5mmnMotor Dimension(Dia.Len):u03a613.5mm12.5mmnWeight(g):2.5gnNo.of Cells(Lipo):1S only
Propeller Gemfan 1610-2 Bi-blades ( V1 )	Weight:0.24gnMaterial: PCnPitch:1 inchnProps Dia:40mmnCenter Hole Dia:1.5mm
VTX	Model: Avatar mini 1s modulenCommunication Frequency: 5.725-5.850 GHznTransmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBmnl/o Interface: JST1.O6(Power in)JST1.O4(USB)nMounting Holes: 25.525.5 mmnDimensions: 3333*6.5 mmnStorage: 8GnRecording: 1080p/720pnWeight: 6.8 gnOperating Temperature: -20-40u2103nChannels: 8nWide Power lnput: 3.1V-5VnSupported FC System: BetaflightnOSD: Canvas modenBitrate: 25mbps / 50mbpsnLatency: Average delay 22msnAntenna connector: IPEX
FPV Camera	Model: Avatar nanonlmage Sensor: 1/2.7u201dInchnResolution: 1080P/6Ofps,720P/120fps,72OP/6OfpsnRatio: 16/9 4/3nLens: 2.1mmnFOV 170u00b0nAperture: F2.0nShutter: Rolling shutternMin.Illumination: 0.001LuxnWeight: 3.5gnDimensions: 141417mmnCoaxial Cable: 45mm

Package Included:

1x Moblite7 V3 Walksnail FPV Drone

1x Spare Canopy

1x Propeller disassemble tool

1x Screw driver

Paypal Kinn

Toys Hobbies & Robot Ranking